No products were found matching your selection.
Other Related Products
-
- Common thickness:20-300 um, ACP grades often 20-150 um
- Available width:300-3000 mm, slit rolls for panel lamination lines
- Resin options:EAA, EVA, PES, PO, and modified polyolefin
- Color:Transparent, translucent, milky white, or resin-dependent
- Structure:Glassine release paper or linerless roll format
- Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
-
- Material: APET / thermoforming PET
- Supply form: roll or sheet
- Common thickness: 150–1200 μm
- Color: clear, transparent, or custom tint
- Surface: smooth, glossy forming surface
- Main use: trays, blisters, clamshells, lids, inserts
-
- Materials: PET, TPU, hydrogel structures
- Width: 1040 mm, 1270 mm, custom
- Length: 50 m, 100 m, custom
- Color: Clear, matte, privacy
- Thickness: 80-250 um typical
- Format: Master roll or slit roll
-
- Material: PE / modified polyolefin hot melt adhesive film
- Color: Milky white, translucent, or natural by grade
- Thickness: Commonly 20 um-200 um, adjustable by structure
- Supply: Full roll, slit roll, sheet, or die-cut piece
- Liner: Release paper, release film, or liner-free option
- Use: Heat lamination, hot pressing, and industrial assembly
-
PET film puncture resistance describes how a defined PET, coated PET, or adhesive-backed PET construction responds to a controlled penetrating load. The result may include peak force, probe penetration, energy to failure, and the visible break pattern. These values support comparison of films exposed to sharp edges, local pressure, handling, or converting stress, but only under matched specimen and equipment conditions. Surface compatibility and removal behavior must be confirmed with the actual sample before full use. Puncture resistance is only one failure mode; the PET film properties comparison guide explains how to review tensile strength, elongation, thickness, shrinkage, optical properties, and surface behavior alongside puncture data.
-
- Materials: PET, PE, PP, PVC, PC.
- Formats: roll stock, sheet, slit roll, cut-to-size.
- Thickness: 0.05 mm-2.00 mm typical range.
- Slit width: 200 mm-1200 mm typical range.
- Roll core: 3 inch or 6 inch.
- Surfaces: gloss, matte, frosted, textured, treated.
-
- Material: Non-adhesive LDPE, LLDPE, or PE blend
- Appearance: Transparent, semi-transparent, or customized color
- Formats: Flat film, tubing, sheeting, bags, and liner bags
- ESD control: Grade-dependent dissipative performance
- Processing: Slitting, heat sealing, bag making, and printing
- Applications: IC, PCB, FPC, and electronic-component packaging
-
- Material: PE protective film for temporary aluminum surface coverage
- Adhesive: Acrylic-based system with low, medium, or high tack options
- Colors: Clear, blue, white, black-and-white, or printed versions
- Thickness: Common custom range from 40 to 100 microns
- Width: Slit rolls and wide rolls up to 2600 mm
- Finish Match: Mill finish, anodized, brushed, painted, and powder-coated aluminum
-
A clear film to protect graphics should keep printed and display-facing surfaces visible while reducing scratches, dust, fingerprints, and handling marks during converting, assembly, storage, transport, or installation. Key risks are trapped particles, edge lift, adhesive transfer, ink lift, bubbles, haze, and appearance change after removal. Selection depends on contact surface, holding force, dwell, exposure, visibility, and removal stage. Because inks, coatings, acrylics, overlays, and display surfaces behave differently, representative sample testing is recommended when the surface, process, or protection time changes.
