No products were found matching your selection.
Other Related Products
-
- Material: APET / thermoforming PET
- Supply form: roll or sheet
- Common thickness: 150–1200 μm
- Color: clear, transparent, or custom tint
- Surface: smooth, glossy forming surface
- Main use: trays, blisters, clamshells, lids, inserts
-
- Material: hard-coated transparent PET film
- Thickness: 50-188 um, selected by coating grade
- Surface: clear gloss, low-haze hardcoat
- Hardcoat side: first visible surface
- Options: printable reverse, liner, adhesive-backed format
- Supply: slit rolls, sheets, die-cut overlay blanks
-
- Material: PET substrate with ITO conductive layer
- Conductive Side: Single-side ITO coating
- Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
- Light Transmittance: Typically >=82%
- Film Thickness: 125 um or 175 um PET
- Format: ITO PET roll or ITO PET sheet
-
- Material: PE protective film
- Adhesive: removable water-based acrylic adhesive
- Color options: clear, blue, white
- Common thickness: 2.5-5 mil
- Common widths: 24″, 30″, 36″
- Use: temporary marble surface protection
-
A clear film to protect graphics should keep printed and display-facing surfaces visible while reducing scratches, dust, fingerprints, and handling marks during converting, assembly, storage, transport, or installation. Key risks are trapped particles, edge lift, adhesive transfer, ink lift, bubbles, haze, and appearance change after removal. Selection depends on contact surface, holding force, dwell, exposure, visibility, and removal stage. Because inks, coatings, acrylics, overlays, and display surfaces behave differently, representative sample testing is recommended when the surface, process, or protection time changes.
-
- Material: Coated PET polyester film
- Base Color: Transparent / white PET
- Common Thickness: 75um-175um
- Surface: Glossy, matte, or semi-matte
- Ink Use: Dye, pigment, aqueous, selected UV inkjet
- Format: Roll or sheet supply
-
- Material: PE/LDPE temporary surface film
- Adhesive: Removable water-based acrylic adhesive
- Thickness: 40-120um typical
- Width: 100-2000mm, slit to order
- Colors: Transparent, blue, white, black-white
- Surfaces: Ceramic, porcelain, glazed, polished tiles
-
Protective film for laser engraving can protect acrylic, anodized aluminum, stainless steel, and coated panels from handling scratches, smoke deposits, and workshop contamination, but the original film should not automatically remain during processing. The decision depends on the laser source, engraving mode, carrier material, adhesive chemistry, surface finish, equipment setting, and planned removal time. The main validation standard is not whether the engraving is visible; it is whether the film stays controlled during the run and can be removed after cooling without unacceptable adhesive transfer, haze, gloss change, coating lift, or fragments around fine details. Testing on the actual substrate is recommended before full use.
-
- Product Type: Clear adhesive film for graphic and photo mounting
- Manufacturer: Films Protective Company
- Appearance: Transparent adhesive layer with clear release liner
- Common Widths: 635 mm, 1040 mm, 1300 mm, 1520 mm, custom width available
- Application Method: Cold lamination, roller pressure, face mounting
- Main Uses: Acrylic photo panels, display boards, printed graphics, rigid presentation panels
