No products were found matching your selection.
Other Related Products
-
- Material: PE protective film
- Adhesive: acrylic pressure-sensitive adhesive
- Color: clear / transparent
- Thickness: 80–110 micron
- Roll Size: 600–1200 mm width, 50–500 m length
- Use: temporary protection for dry synthetic carpet
-
An aluminum panel protective film application must keep the visible finish protected from lamination through fabrication, transport, installation and controlled removal. It is relevant to mill-finish, anodized, brushed, painted, powder-coated and coil-coated aluminum, including aluminum composite panels. The main risks are trapped particles, scratches, edge lift, film movement, difficult peeling, residue and coating appearance change. Selection should be based on the actual surface, coating condition, fabrication stress, expected exposure and removal stage—not thickness or tack alone—and should be confirmed through an actual-panel trial before full use.
-
- Base film: clear PET liner
- Thickness: 12-100 um
- Width: slit or jumbo roll
- Color: transparent or light translucent
- Coating: silicone release layer
- Use: tapes, labels, die-cut parts
-
- Material: optical PET with AF oleophobic surface
- Surface options: clear, matte, anti-glare
- Common thickness: 75 um, 100 um, 125 um
- Color: transparent or light matte
- Format: sheet or custom die-cut size
- Application: phone, tablet, POS and terminal screens
-
- Material: heat-stabilized PET polyester film
- Thickness: 50 um, 75 um, 100 um, 125 um, 175 um
- Surface: corona treated, primer coated, or chemically treated
- Color: clear, slightly hazy, or white
- Ink fit: silver ink, carbon ink, dielectric ink
- Uses: flexible circuits, printed sensors, RFID antennas, membrane switches
-
- Material: PE / modified polyolefin hot melt adhesive film
- Color: Milky white, translucent, or natural by grade
- Thickness: Commonly 20 um-200 um, adjustable by structure
- Supply: Full roll, slit roll, sheet, or die-cut piece
- Liner: Release paper, release film, or liner-free option
- Use: Heat lamination, hot pressing, and industrial assembly
-
- Material: Clear PET backing with silicone adhesive
- Color: Transparent clear
- Heat Reference: Around 150 C short-term exposure
- Test Option: 150 C / 30 min oven exposure
- Adhesion: Low to medium tack
- Format: Roll film with optional PET liner
-
- Material: High-density polyethylene (HDPE)
- Forms: Film rolls, sheet rolls and cut sheets
- Density: Grade-dependent, typically 0.94-0.97 g/cm3
- Colors: Natural, milky white, black or custom color
- Processing: Slitting, sheet cutting and optional perforation
- Uses: Liners, separators and temporary barriers
-
- Material: PE protective film for temporary aluminum surface coverage
- Adhesive: Acrylic-based system with low, medium, or high tack options
- Colors: Clear, blue, white, black-and-white, or printed versions
- Thickness: Common custom range from 40 to 100 microns
- Width: Slit rolls and wide rolls up to 2600 mm
- Finish Match: Mill finish, anodized, brushed, painted, and powder-coated aluminum
