No products were found matching your selection.

Other Related Products

  • Appliance Screen Protective Film

    • Material: PE film with removable pressure-sensitive adhesive
    • Color: clear, light blue, milky white, or custom tint
    • Thickness: typical 30-100 um, grade-dependent
    • Format: rolls, sheets, slit rolls, or die-cut pieces
    • Adhesion: low to low-medium tack for clean peeling
    • Use: appliance glass, display windows, glossy fascia, coated panels
    Read moreDone

  • a Pet Film For Thermoforming

    • Material: APET / thermoforming PET
    • Supply form: roll or sheet
    • Common thickness: 150–1200 μm
    • Color: clear, transparent, or custom tint
    • Surface: smooth, glossy forming surface
    • Main use: trays, blisters, clamshells, lids, inserts
    Read moreDone

  • Anti Static Adhesive Film

    • Material: PET or PE film
    • Adhesive: Acrylic or silicone PSA
    • Color: Clear, light blue, or custom
    • Thickness: 50um, 75um, 100um, or custom
    • Surface Resistance: 10^5-10^11 ohms by grade
    • Use: PCB, FPC, panel, IC carrier, electronics turnover
    Read moreDone
  • Placeholder

    Biaxially Oriented Polyethylene Film

    • Material: Biaxially oriented polyethylene
    • Appearance: Clear or high-gloss
    • Typical thickness: 18-40 um, grade dependent
    • Width: Master rolls and custom slit rolls
    • Surface treatment: One-side or two-side corona treatment
    • Grade options: Printing, laminating, sealable or non-sealable
    Read moreDone

  • Clear Protective Film Temperature – Technical Data & Heat Exposure Limits

    Clear protective film temperature is meaningful only when film construction, adhesive system, exposure temperature, exposure time, substrate, cooling, and post-heat checks are defined. This reference applies mainly to clear PET- or PE-based temporary protective films in heated processing or controlled storage. Use tested-grade or typical values for screening, then confirm peel, dimensional change, haze, edge condition, adhesive transfer, and removal on representative samples.

    Read moreDone

  • AC Duct Protection Film

    • Material: 3-4 mil PE/LDPE film
    • Adhesive: water-based acrylic high tack
    • Width: 24 inch, 36 inch, 48 inch
    • Color: blue or clear
    • Testing: 24-72 hour edge-lift and residue check
    • Options: perforation for repeated duct openings
    Read moreDone

  • Electrical Grade PET Film

    • Material: Biaxially oriented PET polyester film
    • Color: Milky white, hazy white, or natural clear by grade
    • Thickness: 50 um – 350 um
    • Width: Slit roll or master roll, custom width available
    • Surface: Untreated, corona treated, or chemically treated
    • Main use: Motors, transformers, FPC, FFC, and electrical gaskets
    Read moreDone
  • Placeholder

    High Density Polyethylene Film

    • Material: High-density polyethylene (HDPE)
    • Forms: Film rolls, sheet rolls and cut sheets
    • Density: Grade-dependent, typically 0.94-0.97 g/cm3
    • Colors: Natural, milky white, black or custom color
    • Processing: Slitting, sheet cutting and optional perforation
    • Uses: Liners, separators and temporary barriers
    Read moreDone

  • UV Blocking Window Protection Film

    • Material: Clear PE protective film
    • Adhesive: Low-to-medium tack acrylic
    • Color: Transparent clear, custom tint optional
    • Thickness: 50 um-100 um typical range
    • Roll Width: 100 mm-1600 mm customizable
    • Use: Outdoor-exposed window glass protection
    Read moreDone