No products were found matching your selection.
Other Related Products
-
An aluminum panel protective film application must keep the visible finish protected from lamination through fabrication, transport, installation and controlled removal. It is relevant to mill-finish, anodized, brushed, painted, powder-coated and coil-coated aluminum, including aluminum composite panels. The main risks are trapped particles, scratches, edge lift, film movement, difficult peeling, residue and coating appearance change. Selection should be based on the actual surface, coating condition, fabrication stress, expected exposure and removal stage—not thickness or tack alone—and should be confirmed through an actual-panel trial before full use.
-
- Material: removable PE protective film
- Surfaces: acrylic sheet, PMMA, plexiglass, smooth plastic sheet
- Colors: clear, blue, white, black-white, printed
- Thickness: 30-100 um by grade
- Adhesion: low, medium or adjusted tack
- Format: slit rolls with confirmed core and winding direction
-
- Material: PET, polyester, polycarbonate, polyimide, or custom technical film
- Color: clear, translucent, matte, black, or custom tinted
- Common thickness: 25-250 microns
- Supply form: roll, sheet, slit roll, or converted format
- Surface option: plain, coated, adhesive-backed, or linered
- Typical use: stencil cutting, insulation parts, overlays, and protective processing
-
- Material: PET base film with EVA adhesive layer
- Finish: Clear gloss or clear matte
- Thickness: 25um-250um roll thickness
- Temperature: 90C-120C typical range
- Optical Data: >=90% light transmittance, <=3.0% haze for clear gloss grade
- Use: Thermal print lamination and printed material protection
-
- Material: Clear PET backing with silicone adhesive
- Color: Transparent clear
- Heat Reference: Around 150 C short-term exposure
- Test Option: 150 C / 30 min oven exposure
- Adhesion: Low to medium tack
- Format: Roll film with optional PET liner
-
- Material: heat-stabilized PET polyester film
- Thickness: 50 um, 75 um, 100 um, 125 um, 175 um
- Surface: corona treated, primer coated, or chemically treated
- Color: clear, slightly hazy, or white
- Ink fit: silver ink, carbon ink, dielectric ink
- Uses: flexible circuits, printed sensors, RFID antennas, membrane switches
-
- Common supply form: jumbo roll, slit roll, sheet, or die-cut parts
- Appearance: clear transparent film for visible bonding areas
- Typical film base: PET clear film or heat-resistant specialty film construction
- Adhesive direction: clear acrylic bonding grade or process-matched adhesive system
- Typical use: transparent bonding, lamination, masking, and insulation
- Order style: factory production for industrial converting projects
-
- Common thickness:20-300 um, ACP grades often 20-150 um
- Available width:300-3000 mm, slit rolls for panel lamination lines
- Resin options:EAA, EVA, PES, PO, and modified polyolefin
- Color:Transparent, translucent, milky white, or resin-dependent
- Structure:Glassine release paper or linerless roll format
- Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
-
Chemical resistance PET film data is meaningful only when construction, reagent, concentration, contact method, temperature, and exposure time are defined. It applies to PET/BOPET base film, coated PET, and adhesive-backed protective film. Compare appearance, haze, mechanical retention, coating integrity, and peel behavior after exposure. Actual-substrate testing should confirm sensitive coatings, repeated cleaning, or delayed removal.
