No products were found matching your selection.

Other Related Products

  • a Pet Film For Thermoforming

    • Material: APET / thermoforming PET
    • Supply form: roll or sheet
    • Common thickness: 150–1200 μm
    • Color: clear, transparent, or custom tint
    • Surface: smooth, glossy forming surface
    • Main use: trays, blisters, clamshells, lids, inserts
    Read moreDone

  • Removable PE Protective Film for Metal Surfaces

    • Material: PE / polyethylene film with removable pressure-sensitive adhesive
    • Thickness: commonly 30-120 um, depending on grade
    • Adhesion: low tack, medium tack, and high tack options
    • Colors: clear, blue, white, black-white, or printed film
    • Roll format: custom slit width, roll length, core size, and winding direction
    • Use: temporary surface protection during stamping, bending, shearing, handling, and transport
    Read moreDone

  • Adhesive Film For Composite Panel

    • Material: PE film
    • Adhesive: Acrylic-based adhesive
    • Thickness: 30–100 microns
    • Width: 100–1600 mm
    • Color: Transparent, blue, black & white, custom print
    • Use: Composite panel processing and temporary surface protection
    Read moreDone
  • Placeholder

    Linear Low Density Polyethylene Film

    • Material: LLDPE polyethylene resin
    • Thickness: 20-200 um, grade-dependent
    • Width: 100-2200 mm, customizable
    • Color: Clear, translucent or customized
    • Structure: Mono-layer or co-extruded film
    • Supply format: Roll stock, tubing or lay-flat sheeting
    Read moreDone

  • Hot Melt Adhesive Film For Aluminum

    • Common thickness:20-300 um, ACP grades often 20-150 um
    • Available width:300-3000 mm, slit rolls for panel lamination lines
    • Resin options:EAA, EVA, PES, PO, and modified polyolefin
    • Color:Transparent, translucent, milky white, or resin-dependent
    • Structure:Glassine release paper or linerless roll format
    • Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
    Read moreDone

  • Matte Stainless Steel Protective Film

    • Material: PE protective film
    • Adhesive: acrylic pressure-sensitive adhesive
    • Colors: transparent, blue, black & white
    • Thickness: 25–120 microns
    • Tack level: low, medium, or high
    • Suitable surfaces: matte, satin, and brushed stainless steel
    Read moreDone

  • Clear Protective Film Solutions for Printed Graphics and Display Surfaces

    A clear film to protect graphics should keep printed and display-facing surfaces visible while reducing scratches, dust, fingerprints, and handling marks during converting, assembly, storage, transport, or installation. Key risks are trapped particles, edge lift, adhesive transfer, ink lift, bubbles, haze, and appearance change after removal. Selection depends on contact surface, holding force, dwell, exposure, visibility, and removal stage. Because inks, coatings, acrylics, overlays, and display surfaces behave differently, representative sample testing is recommended when the surface, process, or protection time changes.

    Read moreDone

  • Transparent Conductive Ito PET Film

    • Material: PET substrate with ITO conductive layer
    • Conductive Side: Single-side ITO coating
    • Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
    • Light Transmittance: Typically >=82%
    • Film Thickness: 125 um or 175 um PET
    • Format: ITO PET roll or ITO PET sheet
    Read moreDone

  • Protective Film For Tiles

    • Material: PE/LDPE temporary surface film
    • Adhesive: Removable water-based acrylic adhesive
    • Thickness: 40-120um typical
    • Width: 100-2000mm, slit to order
    • Colors: Transparent, blue, white, black-white
    • Surfaces: Ceramic, porcelain, glazed, polished tiles
    Read moreDone