No products were found matching your selection.

Other Related Products

  • Wafer Dicing Protective Film

    • Standard wafer sizes:4 inch, 6 inch, 8 inch, 12 inch
    • Film color:Blue transparent or clear
    • Backing material:PO, PVC, or PET-based film
    • Adhesive type:UV-sensitive acrylic adhesive
    • Process use:Wafer mounting, blade dicing, irradiation, die pick-up
    • Clean packaging:Individual roll pack, double anti-static PE bag, lot traceable
  • Hot Melt Adhesive Film For Aluminum

    • Common thickness:20-300 um, ACP grades often 20-150 um
    • Available width:300-3000 mm, slit rolls for panel lamination lines
    • Resin options:EAA, EVA, PES, PO, and modified polyolefin
    • Color:Transparent, translucent, milky white, or resin-dependent
    • Structure:Glassine release paper or linerless roll format
    • Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
  • Placeholder

    High Density Polyethylene Film

    • Material: High-density polyethylene (HDPE)
    • Forms: Film rolls, sheet rolls and cut sheets
    • Density: Grade-dependent, typically 0.94-0.97 g/cm3
    • Colors: Natural, milky white, black or custom color
    • Processing: Slitting, sheet cutting and optional perforation
    • Uses: Liners, separators and temporary barriers
  • Protective Film for Laser Engraving: Surface Compatibility and Clean-Removal Validation

    Protective film for laser engraving can protect acrylic, anodized aluminum, stainless steel, and coated panels from handling scratches, smoke deposits, and workshop contamination, but the original film should not automatically remain during processing. The decision depends on the laser source, engraving mode, carrier material, adhesive chemistry, surface finish, equipment setting, and planned removal time. The main validation standard is not whether the engraving is visible; it is whether the film stays controlled during the run and can be removed after cooling without unacceptable adhesive transfer, haze, gloss change, coating lift, or fragments around fine details. Testing on the actual substrate is recommended before full use.

  • Placeholder

    Static Dissipative Polyethylene Film

    • Material: Non-adhesive LDPE, LLDPE, or PE blend
    • Appearance: Transparent, semi-transparent, or customized color
    • Formats: Flat film, tubing, sheeting, bags, and liner bags
    • ESD control: Grade-dependent dissipative performance
    • Processing: Slitting, heat sealing, bag making, and printing
    • Applications: IC, PCB, FPC, and electronic-component packaging
  • PET Films For Printed Electronics

    • Material: heat-stabilized PET polyester film
    • Thickness: 50 um, 75 um, 100 um, 125 um, 175 um
    • Surface: corona treated, primer coated, or chemically treated
    • Color: clear, slightly hazy, or white
    • Ink fit: silver ink, carbon ink, dielectric ink
    • Uses: flexible circuits, printed sensors, RFID antennas, membrane switches
  • Matte Stainless Steel Protective Film

    • Material: PE protective film
    • Adhesive: acrylic pressure-sensitive adhesive
    • Colors: transparent, blue, black & white
    • Thickness: 25–120 microns
    • Tack level: low, medium, or high
    • Suitable surfaces: matte, satin, and brushed stainless steel
  • AC Duct Protection Film

    • Material: 3-4 mil PE/LDPE film
    • Adhesive: water-based acrylic high tack
    • Width: 24 inch, 36 inch, 48 inch
    • Color: blue or clear
    • Testing: 24-72 hour edge-lift and residue check
    • Options: perforation for repeated duct openings
  • Furniture Plastic Film for Surface Protection and Decorative Lamination

    • Materials: PE, PVC, PET and PETG
    • Thickness: 30 um-600 um by grade
    • Finishes: clear, matte, high gloss, wood grain, skin-feel
    • Format: slit rolls, jumbo rolls or custom rolls
    • Uses: MDF, cabinet, wardrobe and tabletop panels
    • Checks: peel force, residue, edge lifting, color consistency