No products were found matching your selection.
Other Related Products
-
- Structure: PET carrier / acrylic PSA / release liner
- PET carrier: 25-125 um common range
- Color: clear, white, matte, or application-matched finish
- Adhesive: permanent or removable acrylic PSA
- Liner: PET, glassine, kraft, or silicone-coated liner
- Supply: jumbo roll, slit roll, narrow roll, or sheet-converted stock
-
- Material: Biaxially oriented polyethylene
- Appearance: Clear or high-gloss
- Typical thickness: 18-40 um, grade dependent
- Width: Master rolls and custom slit rolls
- Surface treatment: One-side or two-side corona treatment
- Grade options: Printing, laminating, sealable or non-sealable
-
A clear film to protect graphics should keep printed and display-facing surfaces visible while reducing scratches, dust, fingerprints, and handling marks during converting, assembly, storage, transport, or installation. Key risks are trapped particles, edge lift, adhesive transfer, ink lift, bubbles, haze, and appearance change after removal. Selection depends on contact surface, holding force, dwell, exposure, visibility, and removal stage. Because inks, coatings, acrylics, overlays, and display surfaces behave differently, representative sample testing is recommended when the surface, process, or protection time changes.
-
- Material: LDPE, LLDPE, or PE blend
- Thickness: 40 um-250 um
- Width: slit rolls or wide sheeting
- Color: clear, white, black, blue, or tinted
- Format: single wound, center-folded, or sheets
- Use: greenhouse, outdoor cover, packaging
-
- Common thickness: 0.05-0.50 mm
- Cut style: kiss-cut or through-cut
- Shapes: tabs, strips, frames, windows, discs
- Color: clear, white, black, amber, custom
- Liner: PET liner, paper liner, split liner
- Format: roll, sheet, or single piece
-
- Material: PE / polyethylene film with removable pressure-sensitive adhesive
- Thickness: commonly 30-120 um, depending on grade
- Adhesion: low tack, medium tack, and high tack options
- Colors: clear, blue, white, black-white, or printed film
- Roll format: custom slit width, roll length, core size, and winding direction
- Use: temporary surface protection during stamping, bending, shearing, handling, and transport
-
This ASTM E1745 technical data explains how a polyethylene film vapor retarder should be reviewed below concrete slabs. It separates standard limits from typical references, lot-specific results, and project-confirmed values for thickness, water vapor permeance, tensile strength, puncture resistance, conditioned performance, and traceability. Final acceptance should use the submitted grade, current reports, and a representative mock-up under intended project conditions.
-
- Standard wafer sizes:4 inch, 6 inch, 8 inch, 12 inch
- Film color:Blue transparent or clear
- Backing material:PO, PVC, or PET-based film
- Adhesive type:UV-sensitive acrylic adhesive
- Process use:Wafer mounting, blade dicing, irradiation, die pick-up
- Clean packaging:Individual roll pack, double anti-static PE bag, lot traceable
-
- Material: removable PE protective film
- Surfaces: acrylic sheet, PMMA, plexiglass, smooth plastic sheet
- Colors: clear, blue, white, black-white, printed
- Thickness: 30-100 um by grade
- Adhesion: low, medium or adjusted tack
- Format: slit rolls with confirmed core and winding direction
