No products were found matching your selection.
Other Related Products
-
- Material: PE film with embedded string or scrim reinforcement
- Structure: square, diamond or diagonal grid options
- Thickness: grade-dependent industrial range
- Colors: clear, white and blue options
- Supply: roll-wound or accordion-folded wide rolls
- Options: UV-stabilized, FR / NFR and reinforced-edge grades
-
- Material: 3-4 mil PE/LDPE film
- Adhesive: water-based acrylic high tack
- Width: 24 inch, 36 inch, 48 inch
- Color: blue or clear
- Testing: 24-72 hour edge-lift and residue check
- Options: perforation for repeated duct openings
-
- Materials: PET, TPU, hydrogel structures
- Width: 1040 mm, 1270 mm, custom
- Length: 50 m, 100 m, custom
- Color: Clear, matte, privacy
- Thickness: 80-250 um typical
- Format: Master roll or slit roll
-
Protective film for medical carpets is useful when controlled passages stay operational during personnel movement, trolley traffic, maintenance, or temporary installation work. The key is not maximum adhesion: film must remain stable at doors, turns, overlaps, and traffic hotspots while staying compatible with planned removal. Selection should balance carpet construction, surface treatment, traffic pattern, dwell time, environment, and operator method. In cleanroom or controlled areas, approve the system on the actual carpet before full-area application and retest when surface, traffic, or protection time changes.
-
This ASTM E1745 technical data explains how a polyethylene film vapor retarder should be reviewed below concrete slabs. It separates standard limits from typical references, lot-specific results, and project-confirmed values for thickness, water vapor permeance, tensile strength, puncture resistance, conditioned performance, and traceability. Final acceptance should use the submitted grade, current reports, and a representative mock-up under intended project conditions.
-
- Material: PE film
- Adhesive: Acrylic-based adhesive
- Thickness: 30–100 microns
- Width: 100–1600 mm
- Color: Transparent, blue, black & white, custom print
- Use: Composite panel processing and temporary surface protection
-
- Materials: PET, PE, PVC sheet
- Adhesive: acrylic PSA
- Color: clear, white, black, custom
- Form: sheets, cut pieces, die-cut parts
- Liner: paper or PET release liner
- Use: mounting, lamination, assembly
-
- Material: PE film
- Adhesive: acrylic pressure-sensitive adhesive
- Common colors: clear, blue, milky white
- Common thickness: 30–100 micron
- Roll format: slit rolls, log rolls, jumbo rolls
- Suitable surfaces: coated metal, stainless-look, plastic panels
-
- Material: LDPE/PE with flame-retardant additive system
- Thickness: 50-250 um / 4-10 mil typical range
- Width: 1 m-4 m rolls, slit width available
- Colors: orange, white, natural translucent, opaque
- Roll length: 25 m, 50 m, 100 ft, or specified length
- Options: warning print, anti-static, UV grade after test confirmation
